Send SMS Contact Us

Heat Seal Tester, Hot Seal Strength Tester

Heat Seal Tester

Heat Seal Tester
Product Details:
  • Capacity: Seal Temperature, Pressure and time
  • Brand: Labthink
  • Model: HST-H3

Heat Seal Tester seals the specimen under specified temperature, pressure and dwell time, to test the heat seal strength of laminated films.

Heat Seal Tester conforms to standards of ASTM F2029.

Heat Seal Tester has below FEATURES :

  • Micro-computer control, LCD display, Manu interface, PVC operation board.
  • Seal parameters could be changed in certain extent and be displayed on LCD.
  • Underlying double cylinder simultaneous loop.
  • P.I.D. temperature controller.
  • Two test start mode of manual and foot pedal.
  • Anti-scald design; RS232 port.

Technical Data:

  • Seal temperature : room temperature-300°c (accuracy:±0.2°c)
  • Dwell time : 0.1s-999.9s
  • Dwell pressure : 0.05MPa-0.7MPa
  • Seal surface : 330mm x 10mm

Related products:
  • PARAMTM RTD-R2 Heat Sealer
  • PARAMTM XLW(PC) Tensile Strength Tester
  • PERMETM OX2/230 Oxygen Permeation Test System
  • PERMETM W3/330 Water Vapor Permeation Test System
  • PERMETM VAC-V1 Gas Permeation Tester

Additional Information:
  • Item Code: DIAMON-HST-H3

Gradient Heat Seal Tester

Gradient Heat Seal Tester
The heat seal ability of heat sealing materials would be greatly affected by the factors of melting point, thermal stability, fluidity and thickness. The properest heat seal ability parameters could be obtained accurately and efficiently through this instrument.

Labthink GHS-03 Gradient Heat Seal Tester is professionally designed for the determination of heat sealability of plastic films, composite films, coated paper, and other sealing films under certain sealing speed, pressure and 5 different temperatures.

Gradient Heat Seal Tester conforms to ASTM F2029

Features
  • Digital P.I.D temperature control technology
  • Wide range control of temperature, pressure and time
  • 5 upper sealing jaws are individually controlled by 5 gas cylinders
  • Manual or pedal switch control
  • test 5 groups of specimens at different temperatures simultaneously

Technical Specifications
    1. Sealing Temperature: Room temperature ~ 250°C
    2. Sealing Pressure: 0.1 MPa ~ 0.7 MPa
    3. Temperature Gradient : ≤20°C
    4. Sealing Area: 40 mm x 10 mm x 5

    Related Products
    1. HST-H3 Heat Seal Tester
    2. PSST-100 Portable Heat Seal Strength Tester
    3. HST-H6 Heat Seal Tester
    4. HTT-L1 Hot Tack Tester

      Additional Information:
      • Item Code: DIAMON-GHS-03

      Laboratory Heat Sealer (Simple)

      Laboratory Heat Sealer (Simple)
      Product Details:
      • Brand: Labthink
      • Model: HST-H6
      • Capacity: Seal Temperature, Time, Pressure

      HST-H6 Heat Seal Tester is based on the heat sealing method, and is professionally applicable to the determination of heat seal temperature, dwell time, and the pressure of various composite films to guide industrial production. The instrument adopts the specially designed heat sealing jaws, which completely conform to multiple national and international standards.

      • Digital P.I.D. temperature control technology ensures the preset temperature to be reached rapidly without any fluctuation
      • Top quality parts and components made by world famous brands are used to ensure reliable overall product performance
      • Wide range control of temperature, pressure and time that meet various test conditions
      • Anti-scald design provides safe operating environment
      • The heat seal tester is controlled by micro-computer for the accuracy of test

      Standards
      This Heat Seal Tester conforms to the following standards:ASTM F2029, QB/T 2358, YBB 00122003

      Technical specifications
      1. Sealing Temperature Room temperature ~ 300°C
      2. Accuracy ±0.2°C
      3. Dwell Time 0.1~999.9 s
      4. Sealing Pressure 0.05 MPa ~ 0.7 MPa
      5. Sealing Area 150 mm x 10 mm (customization available)
      6. Heating Mode Single Heating Surface

      Additional Information:
      • Item Code: DIAMON-HST-H6

      Hot Tack Tester

      Hot Tack Tester
      HTT-L1 Hot Tack Tester is designed for hot tack and heat seal performance tests for plastic films, laminated films and other packaging films. Meanwhile, it can be used for peel, shear, tension and other test items for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.

      Features
      • With Digital P.I.D. temperature control system, the preset temperature could be reached in a short time without fluctuations
      • 4 force testing ranges and 6 testing speeds are available to meet the requirements of distinct customers
      • 4 testing functions including hot tack, heat seal, peeling and tensile strength are available in this instrument
      • Automatic zeroing, error alert, overload protection and stroke protection guarantee the safety operation
      • Instrument could be started manually or by pedal switch which is convenient to the customer and the anti scald design ensures the safety operation
      • The Hot Tack Tester is controlled by micro-computer with LCD display, PVC operation panel and menu interface
      • Equipped with RS232 port

      Standards
      This hot tack tester conforms to various national and international standards:ASTM F1921, ASTM F2029, QB/T2358, YBB 00122003

      Technical Specifications
      • Sealing Temperature Room temperature ~ 250°C
      • Temperature Accuracy ±0.2°C
      • Dwell Time (Heat Seal) 0.1~999.9 s
      • Dwell Time (Hot Tack) 0.1~999.9 s
      • Sealing Pressure 0.05 MPa~0.7 MPa
      • Sealing Area 100 mm x 5 mm
      • Sealing Jaw Single sealing or double sealing (Customized)

      Additional Information:
      • Item Code: DIAMON-HTT-L1

      Hot Tack Testing Machine

      Hot Tack Testing Machine
      We are among the pioneers in the industry, offering Hot Tack Testing Machine to our valued customers. Widely utilized for testing semi-rigid and flexible packaging materials, these testers are applicable for paper, adhesive tapes, laminated films, etc. These micro-computer controlled testers comprise of a digital display and have four testing functions for different parameters. The offered testers offer several other features like overload protection, error alert, and digital temperature control system. Hot Tack Testing Machine is applicable in hot tack test for flexible and semi-rigid packaging materials. These Tester is also applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.

      Features:

      • Micro-computer control, digital display, PVC operation board.
      • Four testing functions of Hot Tack, Hot Seal, Peeling and Tensile resistance.
      • Digital P.I.D temperature control system.
      • Four force testing range, Six testing speeds.
      • Anti-scald design, two start modes of manual and foot pedal.
      • Automatic zero, error alert, overload protection and stroke protection, RS232 port.

      Technical Data:

      • Seal temperature : room temperature~250°c
      • Temp. Control accuracy : ±0.2°c
      • Load Cell Range : 0-200N (optional: 30N 50N 100N)
      • Force Accuracy : ±1% of full scale reading
      • Resolution : 0.01 N

      For more information, please feel free to leave us message.

      Related products:
      • PARAMTM HST-H3 Heat Seal Tester
      • PARAMTM XLW(PC) Tensile Strength Tester
      • PERMETM OX2/230 Oxygen Permeation Test System
      • PERMETM W3/330 Water Vapor Permeation Test System
      • PERMETM VAC-V1 Gas Permeation Tester


      Hot Tack Testing Machine conforms to ASTM F1921 and ASTM F2029.


        Additional Information:
        • Item Code: PARAM-HTT-L1
        • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
        • Port of Dispatch: Jinan
        • Production Capacity: In Stock
        • Delivery Time: within 7 days after payment
        • Packaging Details: Veneer Case

        Heat Seal Strength Tester

        Heat Seal Strength Tester
        Labthink provides Heat Seal Strength Tester for plastic films, laminated materials and other packaging materials.

        HST-H3 Heat Seal Tester is used to seal specimen for further determination of seal parameters (sealing temperature, sealing time and sealing pressure) of materials.

        HST-H3 Heat Seal Tester conforms to ASTM F2029

        HST-H3 Heat Seal Tester adopts the specially designed heat sealing jaws and Features as below:
        • Digital P.I.D. temperature control technology
        • controlled by micro-computer with LCD
        • Manual or pedal switch for safe operating

        Technical Specifications.
        1. Sealing Temperature Room temperature ~ 300°C
        2. Accuracy ±0.2°C
        3. Dwell Time 0.1~999.9 s
        4. Sealing Pressure 0.05 MPa ~ 0.7MPa
        5. Sealing Area 330 mm x 10 mm (customization available)
        6. Heating Mode Single heating surface or double heating surfaces
        7. Gas Supply Pressure 0.5 MPa ~ 0.7MPa (outside of supply scope)
        8. Port Size 6 mm PU Tubing
        9. Instrument Dimension 536 mm (L) x 335 mm (W) x 413 mm (H)


        XLW Tensile Strength Tester can be used for Seal Strength Test of Plastic Films and Laminated Materials.

        Additional Information:
        • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
        • Port of Dispatch: Jinan
        • Production Capacity: In Stock
        • Delivery Time: within 7 days after payment
        • Packaging Details: Veneer Case labthink HST-H3

        ASTM F1921 Hot Tack Test Equipment

        ASTM F1921 Hot Tack Test Equipment
        HTT-L1 Hot tack test equipment is used to measure the seal strength of sepcimen after the seal has been made and before it cools to room temperature, This Hot tack test equipment conforms to ASTM F1921 & ASTM F2029.

        HTT-L1 Hot tack test equipment is designed with digital P.I.D Temperature techonology system and controlled by micro computer with LCD display.

        Technical Specifications
        • Sealing Temperature Room temperature ~ 250°C
        • Temperature Accuracy ±0.2°C
        • Dwell Time (Heat Seal) 0.1~999.9 s
        • Dwell Time (Hot Tack) 0.1~999.9 s
        • Sealing Pressure 0.05 MPa~0.7 MPa
        • Sealing Area 100 mm x 5 mm 

        Heat Sealing Test Machine

        Heat Sealing Test Machine
        HST-H6 Heat Seal Testing Machine is based on the heat sealing method, and is professionally applicable to the determination of heat seal temperature, dwell time, and the pressure of heat seal of various composite films to guide industrial production. The instrument adopts the specially designed heat sealing jaws, which completely conform to multiple national and international standards.

        Features
        • Digital P.I.D. temperature control technology
        • Wide range control of temperature, pressure and time that meet various test conditions
        • Controlled by micro-computer for the accuracy of test

        Heat Sealing Test Machine conforms to ASTM F2029


        Technical Specifications

        SpecificationsHST-H6
        Sealing TemperatureRoom temperature ~ 300°C
        Accuracy±0.2°C
        Dwell Time0.1~999.9 s
        Sealing Pressure0.05 MPa ~ 0.7 MPa
        Sealing Area150 mm x 10 mm (customization available)
        Heating ModeSingle Heating Surface
        Gas Supply Pressure0.5 MPa ~ 0.7MPa (outside of supply scope)
        Port SizeΦ6 mm PU Tubing
        Instrument Dimension290 mm (L) x 475 mm (W) x 298 mm (H)
        Power SupplyAC 220V 50Hz
        Net Weight19 kg


        Related Products

        HST-H6 Heat Sealing Test Machine
        GHS-03 Gradient Heat Sealer

        Additional Information:
        • Item Code: HST-H6
        • Production Capacity: in stock
        • Delivery Time: 7 days after payment
        • Packaging Details: Veneer Case

        Laboratory Heat Sealer

        Laboratory Heat Sealer
        Product Details:
        • Brand: Labthink
        • Model: RTD-R2
        • Capacity: Sealing Temperature, Pressure and dwell time

        We make available Laboratory Heat Sealer to our esteemed customers. Their unique feature is that five different materials can be simultaneously tested using these devices. The subjected materials are tested under specific temperature and pressure conditions for a given period of time. Their anti-scald design comprises of a PID temperature controller, PVC operation board, and LCD Display. These easy to use testers are in strict conformance with the highest industry standards. Heat Sealer seals the specimen under specified temperature, pressure and dwell time to test the heat seal strength of laminated films.

        Heat Sealer conforms to standards of:

        • ASTM F2029

        Features:

        • Micro-computer control
        • LCD display
        • Manu interface
        • PVC operation board
        • Five pairs of specimens testable simultaneously
        • Underlying double cylinder simultaneous loop
        • P.I.D. temperature controller
        • Anti-scald design(RS232 port)

        Technical Data:

        • Heat Seal Temperature : room temperature-250°c
        • Dwell Pressure : 0.05 MPa-0.7MPa
        • Dwell Time : 0.1s-999.9s
        • Temperature Accuracy : ±0.2°c
        • Temperature Gradation : ≤20°c

        Additional Information:
        • Item Code: PARAM-RTD-R2

        Heat Sealing Test Machine

        Heat Sealing Test Machine
        HST-H3 Heat Sealing Test Machine can be used to seal specimen for further determination of seal parameters of basic films, laminated films, coating paper and other heat sealing laminated films according to the requirement of related standards.


        HST-H3 Heat Sealing Test Machine is composed of upper and lower heat sealing jaws. Before the test, preset the heat seal temperature, pressure and dwell time value, place the specimen in between the upper and lower jaws, and then press start button. The whole sealing process can be finished automatically.

        Technical Specifications
        • Sealing Temperature Room temperature ~ 300°C
        • Accuracy ±0.2°C
        • Dwell Time 0.1~999.9 s
        • Sealing Pressure 0.05 MPa ~ 0.7MPa
        • Sealing Area 330 mm x 10 mm (customization available)

        Hot Tack Testing Equipment

        Hot Tack Testing Equipment
        HTT-L1 Hot Tack Testing Equipment is designed for hot tack and heat seal performance tests for plastic films, laminated films and other packaging films. Meanwhile, it can be used for peel, shear, tension and other test items for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.
        Technical Specifications
        1. Sealing Temperature Room temperature ~ 250°C
        2. Temperature Accuracy ±0.2°C
        3. Dwell Time (Heat Seal) 0.1~999.9 s
        4. Dwell Time (Hot Tack) 0.1~999.9 s
        5. Sealing Pressure 0.05 MPa~0.7 MPa
        6. Sealing Area 100 mm x 5 mm

        This Hot Tack Testing Equipment conforms to various national and international standards:ASTM F1921, ASTM F2029, QB/T2358, YBB 00122003

        Features
        • With Digital P.I.D. temperature control system, the preset temperature could be reached in a short time without fluctuations
        • 4 force testing ranges and 6 testing speeds are available to meet the requirements of distinct customers
        • 4 testing functions including hot tack, heat seal, peeling and tensile strength are available in this instrument
        • Automatic zeroing, error alert, overload protection and stoke protection guarantee the safety operation
        • Instrument could be started manually or by pedal switch which is convenient to the customer and the anti scald design ensures the safety operation
        • The instrument is controlled by micro-computer with LCD display, PVC operation panel and menu interface

        Additional Information:
        • Item Code: HTT
        • Production Capacity: in stock
        • Delivery Time: within 7 days after payment
        • Packaging Details: Veneer Case

        ASTM F2029 Heat Seal Testing Machine

        ASTM F2029 Heat Seal Testing Machine
        Labthink HST-H3 Heat Seal Testing Machine is to determine the sealing temperature, sealing pressure and sealing time of spciemen based on ASTM F2029

        Features of Labthink HST-H3 Heat Seal Testing Machine
        • Digital P.I.D. temperature control technology
        • Manual or pedal switch, as well as anti-scald design.
        • controlled by micro-computer with LCD

        Technical Specifications
        1. Sealing Temperature Room temperature ~ 300°C
        2. Accuracy ±0.2°C
        3. Dwell Time 0.1~999.9 s
        4. Sealing Pressure 0.05 MPa ~ 0.7MPa
        5. Sealing Area 330 mm x 10 mm (customization available)

        Heat Seal Testing Instrument

        Heat Seal Testing Instrument
        Product Details:
        • Brand: Labthink
        • Model: HST-H3

        Heat Seal Testing Instrument-- to determine sealing temperature, pressure, time
        -- conform to ASTM F2029
        -- Certified by ISo 9001, CE

        Labthink HST-H3 Heat Seal Testing Instrument is based on the heat sealing method, and is professionally applicable to the determination of heat seal temperature, dwell time, and the pressure of various composite films to guide industrial production. The instrument adopts the specially designed heat sealing jaws, which completely conform to multiple national and international standards.

        Features
        • Digital P.I.D. temperature control technology
        • Wide range control of temperature, pressure and time
        • Manual or pedal switch, as well as anti-scald design
        • controlled by micro-computer with LCD 

        Technical Specifications 
        1. Sealing Temperature Room temperature ~ 300°C
        2. Accuracy ±0.2°C
        3. Dwell Time 0.1~999.9 s
        4. Sealing Pressure 0.05 MPa ~ 0.7MPa
        5. Sealing Area 330 mm x 10 mm (customization available) 

        Heat Sealing Machine Laboratory Equipment

        Heat Sealing Machine Laboratory Equipment
        Labthink provides Heat Sealing Machine Laboratory Equipment to measure sealing pressure, sealing temperature and sealing time of plastic packaging materials. 

        This Heat Sealing Machine Laboratory Equipment adopts the specially designed heat sealing jaws, which completely conform to multiple national and international standards ASTM F2029.

         Features of Labthink Heat Sealing Machine Laboratory Equipment 
        •  Digital P.I.D. temperature control technology
        • Wide range control of temperature, pressure and time
        • Manual or pedal switch
        • controlled by micro-computer with LCD, PVC operation panel and menu interface


        Technical Specifications 
        1. Sealing Temperature:  Room temperature ~ 300°C
        2. Accuracy: ±0.2°C
        3. Sealing Pressure: 0.05 MPa ~ 0.7MPa
        4. Sealing Time: 0.1~999.9 s
        5. Sealign Area: 330 mm x 10 mm (customerized)

        Plastic Packaging Heat Seal Tester Laboratory Use

        Plastic Packaging Heat Seal Tester Laboratory Use
        Labthink develops and manufacturers professional testing equipment of plastic packaging -- heat seal tester used in laboratory.

        Heat Seal Tester is an equipment used in laboratory to determine seal temperature, dwell time and sealing pressure of plastics. to determine a proper parameters to meet the plastic usage.

        Labthink HST-H3 Heat Seal Tester is equipped with two sealing jaws with digital P.I.D temperature technology.

        Labthink Heat Seal Tester conforms to ASTM F2029

        Techncial Specifications
        • Sealing Temperature Room temperature ~ 300°C
        • Accuracy ±0.2°C
        • Dwell Time 0.1~999.9 s
        • Sealing Pressure 0.05 MPa ~ 0.7MPa
        • Sealing Area 330 mm x 10 mm (customization available)
        X
        Provide Us More Details
        Is this Requirement:

        One Time Regular

        How soon do you want this:

        Immediate After 1 month

        Purpose of Requirement:

        Reselling End Use Raw Material

        X

        Looking for Heat Seal Tester, Hot Seal Strength Tester ?

        country-ico

        We will contact you soon !

        Yarina Gao

        (Marketing Assistant)

        Labthink Instruments Co. Limited

        Wuyingshan Road, Jinan, Shandong, China

        More Categories

        View All Categories »
        Send SMS
        Contact Us