Send SMS Contact Us

Adhesive Adhesion Testing Equipment

Primary Adhesion Tester

Primary Adhesion Tester
This Primary adhesion tester is applicable in tack tests of pressure sensitive adhesive tapes, adhesives and adhesive products.

Principle

Primary adhesion tester employs rolling ball principle, tests adhesive by test the properties of the adhesives that enables it to form a bond of measurable strength immediately after adhesive and steel ball are brought into contact under low pressure.


Configuration

  • Incline panel, ball-placing tool, supporting shelf, adjustable parallel base and steel balls.


Technical data

  • Adjustable angle: 0~60°
  • Width of panel: 120mm
  • Test area width: 80mm
  • Standard steel balls: 1/32~1inch
  • Dimension: 320(L)mm×140(B)mm×180(H)mm
  • Net weight: 6kg

Standard

  • GB 4852, JIS Z0237

Applications

  • The Primary adhesion tester found applications in following :
  • Label Testing
  • Adhesives Testing
  • Laboratory Testing

Additional Information:
  • Item Code: DIAMON-CZY-G

Lasting Adhesive Tester

Lasting Adhesive Tester
Lasting Ahesive Tester
-- measure the durable adhesion of pressure-sensitive Tapes
-- Conforms to ASTM D3654, JIS Z0237
-- 6 Testing Stations

CZY-6S Labthink Lasting Adhesive Tester can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.

Features
  • Standard test plates and weights ensure the accuracy of test data
  • Six testing stations could test groups of specimens simultaneously
  • Auto timing and locking functions provide higher accuracy of test results
  • The instrument is controlled by micro-computer, with LCD

Techncial Specifications
  1. Standard Roller 2000 g ±50 g
  2. Weight 1000 g ±10 g (with load plate)
  3. Test Plate 60 mm (L) x 40 mm (W) x 1.5 mm (D)

Additional Information:
  • Item Code: DIAMON-CZY-6S

90 Angle Adhesion Peel Force Tester

90 Angle Adhesion Peel Force Tester
Labthink provides 90 Degree Angle Adhesion Peel Force Tester for adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protection films, release paper, laminated films, leatheroid, woven bags and paper.

Labthink 90 Degree Angle Adhesion Peel Force Tester can be used for 90/180 degree peel strength test and tensile test of applicable materials 

Labthink 90 Degree Angle Adhesion Peel Force Tester is controlled by micro computer with LCD display and equipped with safe operation of over-travel protection, overload protection

Labthink 90 Degree Angle Adhesion Peel Force Tester technical specifications 
  • Capacity Range 0~200 N (30 N, 50 N and 100 N are optional)
  • Accuracy 1% FS
  • Resolution 0.01N
  • Test Speed 50, 100, 150, 200, 250, 300, 500 mm/min
  • Specimen Width ≤30 mm
  • Stroke 500 mm
  • Instrument Dimension 1000 mm (L) x 370 mm (W) x 400 mm (H)
  • Power Supply AC 220V 50 Hz
  • Net Weight 27 kg

Adhesive Tensile & Shear Tester

Adhesive Tensile & Shear Tester
Adhesive Tensile & Shear Tester
-- Conform to ASTM D1002, ASTM D2095, ASTM D3165, ASTM D2339
-- Certified by ISO 9001, CE
-- Controlled by Micro Computer

NLW-20 Adhesive Shear & Tensile Tester is professionally applicable to the determination of tensile, shearing and pulling properties of various adhesives.

Technical Specifications
  • Load Cell Capacity 20 KN
  • Accuracy 1% FS
  • Resolution 1 N
  • Speed 5 mm/min ~ 50mm/min
  • Test Stroke ≤150 mm

Features
  1. controlled by micro-computer, with digital display screen
  2. micro-printer and standard RS232

Additional Information:
  • Item Code: DIAMON-NLW-20

ASTM D1002 Adhesive Shear Tester and Tensile Tester

ASTM D1002 Adhesive Shear Tester and Tensile Tester
Labthink Adhesive tensile & shear Tester is professionally applicable to the determination of tensile, shearing and pulling properties of various adhesives.

Labthink NLW-20 Adhesive Tensile & Shear Tester conforms to ISO 4587, GB/T 6329, GB 7124, GB/T 5163, GB/T 6328, ASTM D1002, ASTM D2095, ASTM D3165, ASTM D2339, JIS K6850, JIS K6849, HG4-852-854

Techncial Specifications
  • Load Cell Capacity 20 KN
  • Accuracy 1% FS
  • Resolution 1 N
  • Speed 5 mm/min ~ 50mm/min
  • Test Stroke ≤150 mm
  • Temperature: 10°C ~ 40°C
  • Humidity: 20%RH ~ 70%RH 

Lasting Adhesion Testing Equipment

Lasting Adhesion Testing Equipment

Lasting Adhesion Testing Equipment is designed and manufactured according to GB4851, compatible with ASTM D3654, and specially designed for adhesives, adhesive tapes, adhesive products and related industries. It is applicable in the holding power test of pressure sensitive adhesive tapes.

 

The Parameters

 

ItemsSpecifications
Standard Roller2000 g ±50 g
Weight1000 g ±10 g (with load plate)
Test Plate60 mm (L) x 40 mm (W) x 1.5 mm (D)
Timing Range0 ~ 100 h (standard)
0 ~ 10000 h (optional)
Number of Stations6

 

 

Method

1.Paste tape to steel panel

2.hung standard load on lower end

3.Keep status sometime




Additional Information:
  • Item Code: YGJ-02
  • Production Capacity: in stock
  • Delivery Time: 7 days after payment
  • Packaging Details: Veneer Case

Retention Adhesive Tester

Retention Adhesive Tester
This Retension Adhesive Tester is specially designed for adhesives, adhesive tapes, adhesive products and relative industries. It is applicable in holding power test of pressure sensitive adhesive tapes.


Principle

Hang the panels covered by adhesive tapes on to the test shelf vertically, hang poises on the end of the panel, the weight of poise is specified. After a period, test the displacement of the specimen or test the time during which the specimen leave the paneltotally to express the ability to remain adhered. Micro-computer counts, LCD displays test time.


Configuration

  • Timing system, test panels, loading panels, poises, frame, standard roller and so on.

Technical data

  • Standard roller: 2000g±50g
  • Poise: 1000±10g (Include the weight of loading panel)
  • Test panel: 60(L)mm×40(B)mm×1.5(D)mm
  • Time range: 0~100h
  • Work station: 6 pieces
  • Dimension: 600(L)mm×240(B)mm×400(H)mm
  • Net weight: 20kg
  • Power: AC 220V 50Hz

Standard

  • GB 4851, ASTM D3654, JIS Z0237

Applications

  • The Retension Adhesive Tester found applications in following
  • Physical Properties Testing
  • Plastic & Paper Testing
  • Laboratory Testing

Shear Adhesion Tester

Shear Adhesion Tester
This Shear Adhesion Tester is specially designed for adhesives, adhesive tapes, adhesive products and relative industries. It is applicable in holding power test of pressure sensitive adhesive tapes.

Principle

Hang the panels covered by adhesive tapes on to the test shelf vertically, hang poises on the end of the panel, the weight of poise is specified. After a period, test the displacement of the specimen or test the time during which the specimen leave the paneltotally to express the ability to remain adhered. Micro-computer counts, LCD displays test time.

Configuration

  • Timing system, test panels, loading panels, poises, frame, standard roller and so on.

Technical data

  • Standard roller: 2000g±50g
  • Poise: 1000±10g (Include the weight of loading panel)
  • Test panel: 60(L)mm×40(B)mm×1.5(D)mm
  • Time range: 0~100h
  • Work station: 6 pieces
  • Dimension: 600(L)mm×240(B)mm×400(H)mm
  • Net weight: 20kg
  • Power: AC 220V 50Hz

Standard

  • GB 4851, ASTM D3654, JIS Z0237

Applications

  • The Shear Adhesion Tester found applications in following
  • Physical Properties Testing
  • Plastic & Paper Testing
  • Laboratory Testing

Bond Peel Adhesion Test Machines

Bond Peel Adhesion Test Machines
Labthink provides Bond Peel Adhesion Test Machines for adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protection films, release paper, laminated films, leatheroid, woven bags and paper.

Labthink Bond Peel Adhesion Test Machines can be used for 90/180 degree peel strength test and tensile test of applicable materials 

Labthink Bond Peel Adhesion Test Machines is controlled by micro computer with LCD display and equipped with safe operation of over-travel protection, overload protection

Labthink Bond Peel Adhesion Test Machines technical specifications 
  • Capacity Range 0~200 N (30 N, 50 N and 100 N are optional)
  • Accuracy 1% FS
  • Resolution 0.01N
  • Test Speed 50, 100, 150, 200, 250, 300, 500 mm/min
  • Specimen Width ≤30 mm
  • Stroke 500 mm
  • Instrument Dimension 1000 mm (L) x 370 mm (W) x 400 mm (H)
  • Power Supply AC 220V 50 Hz
  • Net Weight 27 kg

ASTM D3654 Lasting Adhesive Shear Strength Tester

ASTM D3654 Lasting Adhesive Shear Strength Tester
Labthink provides lasting adhesive shear strength tester for adhesive tapes 

This Lasting Adhesive Shear Strength Tester conforms to the standards: GB/T 4851, ASTM D3654, JIS Z0237

Technical Specifications
  • Standard Roller 2000 g ±50 g
  • Weight 1000 g ±10 g (with load plate)
  • Test Plate 60 mm (L) x 40 mm (W) x 1.5 mm (D)
  • Timing Range 0 ~ 100 h (standard)
  • 0 ~ 10000 h (optional)
  • Number of Stations 6
  • Instrument Dimension 600 mm (L) x 240 mm (W) x 400 mm (H) 

BOPP Tape Shear Tester

BOPP Tape Shear Tester
The BOPP Tape Shear Tester is an equipment to determine the resistance to shear of tape under constant load. It is measured in terms time in minutes for the tape to get disengaged from the holding surface under specified test load.

 This test instrument conforms to the standards: GB/T 4851, ASTM D3654, JIS Z0237

 Digital Timers are then activated to start counting. The platform below the hanging weights is fitted with actuators. As soon as the tape fails and the weight falls on the platform, the Timers freeze the data.

Techncial Specifications
  • Standard Roller 2000 g ±50 g
  • Weight 1000 g ±10 g (with load plate)
  • Test Plate 60 mm (L) x 40 mm (W) x 1.5 mm (D) 

Adhesion Tester

Adhesion Tester
Adhesion Tester 
-- Initial and Retention Adhesion Tester
-- CE, ISO 9001 Certifications
-- JIS Z0237 , ASTM D3654

  1. Labthink provides Initial adhesion tester CZY-G and Retention Adhesion Tester CZY-6S to measure the adhesion properties of Adhesive tapes, labels, medical patches and protective films. 

Tenchnical Specifications
CZY-6S Lasting Adhesion Tester
  1. Standard Roller 2000 g ±50 g
  2. Weight 1000 g ±10 g (with load plate)
  3. Test Plate 60 mm (L) x 40 mm (W) x 1.5 mm (D)
  4. Timing Range 0 ~ 100 h (standard)
  5. 0 ~ 10000 h (optional)
  6. Number of Stations 6
  7. Instrument Dimension 600 mm (L) x 240 mm (W) x 400 mm (H)
  8. Power Supply AC 220V  50Hz
  9. Net Weight 20 kg 

CZY-G Initial Adhesion Tester 
  1.  Angle Range 0 ~ 60°
  2. Panel Width 120 mm
  3. Testable Area Width 80 mm
  4. Standard Steel Ball 1/32 inch ~ 1 inch
  5. Instrument Dimension 320 mm (L) x 140 mm (W) x 180 mm (H)
  6. Net Weight 6 kg

Initial Adhesive Tester

Initial Adhesive Tester
This Initial Adhesive tester is applicable in tack tests of pressure sensitive adhesive tapes, adhesives and adhesive products.

Principle

Initial Adhesive tester  employs rolling ball principle, tests adhesive by test the properties of the adhesives that enables it to form a bond of measurable strength immediately after adhesive and steel ball are brought into contact under low pressure.


Configuration

  • Incline panel, ball-placing tool, supporting shelf, adjustable parallel base and steel balls.


Technical data

  • Adjustable angle: 0~60°
  • Width of panel: 120mm
  • Test area width: 80mm
  • Standard steel balls: 1/32~1inch
  • Dimension: 320(L)mm×140(B)mm×180(H)mm
  • Net weight: 6kg

Standard

  • GB 4852, JIS Z0237

Applications

  • The Initial Adhesive tester  found applications in following :
  • Label Testing
  • Adhesives Testing
  • Laboratory Testing

Rolling Ball Adhesive Tester

Rolling Ball Adhesive Tester
This Rolling Ball Adhesive tester is applicable in tack tests of pressure sensitive adhesive tapes, adhesives and adhesive products.

Principle

Rolling ball adhesive tester employs rolling ball principle, tests adhesive by test the properties of the adhesives that enables it to form a bond of measurable strength immediately after adhesive and steel ball are brought into contact under low pressure.


Configuration

  • Incline panel, ball-placing tool, supporting shelf, adjustable parallel base and steel balls.


Technical data

  • Adjustable angle: 0~60°
  • Width of panel: 120mm
  • Test area width: 80mm
  • Standard steel balls: 1/32~1inch
  • Dimension: 320(L)mm×140(B)mm×180(H)mm
  • Net weight: 6kg

Standard

  • GB 4852, JIS Z0237

Applications

  • The testers found applications in following :
  • Label Testing
  • Adhesives Testing
  • Laboratory Testing

Additional Information:
  • Item Code: CZY-G
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Production Capacity: in stock
  • Delivery Time: 7 days after payment
  • Packaging Details: veneer case

Adhesive Tensile Tester

Adhesive Tensile Tester
NLW-20 Adhesive Tensile & Shear Tester is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives.

This Adhesive Tensile & Shear Tester conforms to various national standards as follows:
ISO 4587, GB/T 6329, GB 7124, GB/T 5163, GB/T 6328, ASTM D1002, ASTM D2095, ASTM D3165, ASTM D2339, JIS K6850, JIS K6849, HG4-852-854 

Features of Adhesive Tensile & Shear Tester 
  • The system is controlled by micro-computer, with digital display screen, and PVC operation panel, which is convenient for customers to view test data
  • Export test data in standard units and support statistical analysis of group specimens
  • Continuous variable speed regulating meets the requirements of different test conditions
  • Equipped with micro-printer and standard RS232 port for convenient data transfer

Technical Specifications

Items Specifications
Load Cell Capacity 20 KN
Accuracy 1% of reading value
Resolution 1 N
Speed 5 mm/min ~ 50mm/min
Test Stroke ≤150 mm
Environment Condition Temperature: 10°C ~ 40°C Humidity: 20%RH ~ 70%RH
Power Supply AC 220V 50Hz
Instrument Dimension 1090 mm (L) x 610 mm (W) x 640 mm (H)
Net Weight 125 kg (including the weight of hydraulic oil)

Additional Information:
  • Item Code: NLW-20
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Rolling Ball Tack Tester

Rolling Ball Tack Tester

Primary Adhesion Testing machine / roll ball tack tester

model number: CZY-G

Product introduction

CZY-G Primary Adhesive Tester is applicable in primary adhesive tests of pressure sensitive adhesive tapes, adhesive bandage (plaster), label, protective films and other products.

 

Product features

Adopt rolling ball method to test the primary adhesive properties by testing the bond strength between adhesive specimen and steel ball.

 

Product Application

It is mainly applicable in primary adhesive tests of pressure sensitive adhesive tapes, adhesive bandage (plaster), label, protective films and other products.

 

Technical standard

Adopt rolling ball method to test the immediate adhesive strength property. The test angle can be adjusted according to users’ test requirements. The test steel ball completely complies with standard to ensure the accurate test results. This tester satisfies standard GB/T4957.

Adhesive Adhesion Test

Adhesive Adhesion Test

Application:

This tester is used to test the adhesion retentivity of the tape adhered onto the test plate with rated load and rated time. Measure the sliding distance or record the time while it drops off during the rated time.

Standards
This test instrument conforms to the standards: GB/T 4851, ASTM D3654, JIS Z0237

Specifications

  1. Standard Roller 2000 g ±50 g
  2. Weight 1000 g ±10 g (with load plate)
  3. Test Plate 60 mm (L) x 40 mm (W) x 1.5 mm (D)
  4. Timing Range 0 ~ 100 h (standard)
  5. 0 ~ 10000 h (optional)
  6. Number of Stations 6
  7. Instrument Dimension 600 mm (L) x 240 mm (W) x 400 mm (H)

Tape Holding Power Tester

Tape Holding Power Tester
Holding power Tester. This tester is aim to test the adhesive strength of tape under static load. Calculate the keeping time of tapes under a specified load, to know the adhesive strength and using life of tapes.

 To adhesive the tape on the stainless steel plank and 2kg rubber pressing wheel run over it to make sure that stick on plank homogeneously. The adhesive area usually is 1 inch X 1 inch, leave it for 20 minutes to make the adhesive stuck stable, then load a certain weight( 1kg in common use) and record time from loading to come off. Can adjust the loading weight or measure the time that adhesive moves to the fixed distance to determine the quality of adhesive.

Technical Specifications
Standard Roller 2000 g ±50 gWeight 1000 g ±10 g (with load plate)Test Plate 60 mm (L) x 40 mm (W) x 1.5 mm (D)Timing Range 0 ~ 100 h (standard)0 ~ 10000 h (optional)Number of Stations 6Instrument Dimension 600 mm (L) x 240 mm (W) x 400 mm (H)Power Supply AC 220V  50HzNet Weight 20 kg

Tape Retentivity Tester

Tape Retentivity Tester
Use roller to roll one end of the tape in order to adhere to testing plate, hang a specified load on its lower end. Measure the distance of slide of the tape after a certain time. If it drops during testing, record it’s time to evaluate tape’s retention.

Technical Specificatioins
Standard Roller 2000 g ±50 gWeight 1000 g ±10 g (with load plate)Test Plate 60 mm (L) x 40 mm (W) x 1.5 mm (D)Timing Range 0 ~ 100 h (standard)0 ~ 10000 h (optional)Number of Stations 6Instrument Dimension 600 mm (L) x 240 mm (W) x 400 mm (H)Power Supply AC 220V  50HzNet Weight 20 kg 
Standards
ASTM D3654

Adhesion Testers

Adhesion Testers

Adhesion testing can be carried out on a range force and material testing systems which will depend on your application needs, force capacity, and the data you require from your test results. We have a wide variety of force gages, motorized force test stands, and material testing systems and software to meet your application needs.

 

NLW-20 Adhesive Tensile & Shear Tester

This Instrument is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives, which conforms to various ASTM standards ASTM D1002, ASTM D2095, ASTM D3165, and ASTM D2339.

 

CZY-G Initial Adhesive Tester

This instrument is used to test the initial adhesion property of adhesive tapes. It is based on falling ball method and the initial adhesion property of adhesive taps could be obtained by observing adhesive effect occurred immediately after rolling ball and adhesive specimen come into contact.

 

This Instrument conforms to JIS Z0237.

 

CZY-6S Adhesive tapes retention adhesive tester

 

This Instrument is used to measure the retention adhesion properties of adhesive tapes in a relative long time. The test plate with adhesive specimen is vertically hanged on the stand and its bottom is attached with a standard weight. The retention adhesive property could be obtained by measuring the displacement of specimen on vertical test plate or the time to failure at such load.

 

The Instrument has 6 work stations, which highly improved the efficiency of the testing. It is controlled by computer and timing is automatic finished.

 

u  There is another instrument can be used to test the tensile strength and peel strength of adhesives, Labthink XLW Tensile tester. This is an universal testing machine, besides tensile test and peel test, it can also used for tear test, seal strength test for hundred kinds of materials.

 

For more information about adhesive testing/adhesion testing.

Additional Information:
  • Item Code: adhesion
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Adhesive Adhesion Testing Equipment ?

country-ico

We will contact you soon !

Yarina Gao

(Marketing Assistant)

Labthink Instruments Co. Limited

Wuyingshan Road, Jinan, Shandong, China

More Categories

View All Categories »
Send SMS
Contact Us